Study of Properties of Concrete using Marble Powder and . - ijertweight of cement and dredged sand replaced by · 10%,15%,20%,25% by weight of fine aggregate The fresh · properties and mechanical properties for all the mixes were · studied. The aim of this work is to study the possible use of · Marble powder and dredged sand in concrete production, which · would reduce both the.replacement of sand by marble powder in concrete,replacement of sand by marble powder in concrete,Influence of line waste as partial replacement material for .This paper reports the experimental study undertaken to investigate the influence of partial replacement of sand with line waste (LSW), with marble powder (M.P) as an additive on the concrete properties. The replacement proportion of sand with line waste, 25%, 50%, and 75% were practiced in the concrete.
Influence of line waste as partial replacement material for .This paper reports the experimental study undertaken to investigate the influence of partial replacement of sand with line waste (LSW), with marble powder (M.P) as an additive on the concrete properties. The replacement proportion of sand with line waste, 25%, 50%, and 75% were practiced in the concrete.replacement of sand by marble powder in concrete,Partial Replacement of Cement with Marble Dust Powder . - IJRASETSand is ordinary form of fine aggregate used in concrete production. In this experiment, and mixed with Marble powder is employed as fractional replacement with Cement. Marble powder is the waste which is generated from Marble finishing Inpowderries in construction which has similar physical and chemical actions of.John Frank
This study aims to develop a concrete mixture with maximum marble content that has strength properties comparable to that of the non-marble reference concrete (without marble powder), as opposed to developing a marble powder concrete with maximum compressive strength. The main purpose is to replace sand with.
weight of cement and dredged sand replaced by · 10%,15%,20%,25% by weight of fine aggregate The fresh · properties and mechanical properties for all the mixes were · studied. The aim of this work is to study the possible use of · Marble powder and dredged sand in concrete production, which · would reduce both the.
Keywords: WMD-Waste Marble Dust, Concrete, Strength, Reuse, Replacement. 1. Introduction. Concrete is an extensively used building item and consists of cement, coarse aggregate, fine aggregate and deliberate amount of water. Natural sand is usually used as fine aggregate. For appropriate rapid growth in structural.
In this experimental study, the effects of using waste marble dust (WMD) as a fine material on the mechanical properties of the concrete have been investigated. For this purpose four different series of concrete-mixtures were prepared by replacing the fine sand (passing 0.25 mm sieve) with WMD at proportions of 0, 25,.
102. Study of Partial Replacement of Cement by Marble Powder. 1Ramya Raju, 2Geetha K. Jayaraj, 3Abuzar Aftab Shaikh. Department of Civil Engineering, Shivajirao S. Jondhle College of Engineering and Technology, Asangaon. Abstract- This paper presents the study of concrete mix design using marble powder.
Self-compacting concretes (SCC) are highly fluid concretes that can flow and be placed in formwork under their own weight without the requirement of internal or external energy. This fluidity is obtained with the use of high paste volume and superplasticizer. The paste of SCC is made principally of cement, which is the most.
Detail of mortar mix has been shown in Table 1 &2. Table 1: Mortar Mix (1:3) Proportion when cement was replaced. Mix Proportion-1. % Replacement 0% 5% 10% 15% 20%. Cement. 1200 1140 1080 1020 96. Sand. 3600 3600 3600 3600 3600. Marble Powder. 00. 60. 120. 180. 240. Marble Granules 00. 00. 00. 00. 00.
Concrete mix is adopted for partial replacement of sand with marble dust. Cubes, cylinders and prisms are cast and cured to conduct compressive strength, split tensile strength and flexural strength test at 28 days. Mix design calculation is done as per IS 10262:2009. Marble dusts are added at 10%, 20%, 30%, 40%, and.
The concrete industry is on the lookout for replacement materials constantly due to various ill effects in the current materials. In this experimental investigation cement is partially replaced by marble powder and sand by tile powder and blue metal by tile chips. These materials have been used as replacement in 10, 20 & 30%.
Aug 1, 2017 . The present study is aimed at utilizing Waste marble powder and quarry sand as partial replacement of cement and fine aggregate in concrete and comparing it with conventional concrete. This experimental investigation is carried out in three phases in 1st phase M20 grade of concrete is produced by.
replacement of cement and sand both partially & combined with the waste marble powder/waste marble granules in which, by the partial replacement of cement and sand, the compressive, flexure and split-tensile strength get increased up to a certain percentage but get decreased with the combined replacement of.
6 the amount of marble powder addition (10% and 20% by weight of cement), the basis for. 1 adding marble powder (as either cement or sand replacement), and by eventually adding a. 2 superplasticizing admixture (at a dosage of 0.5% by weight of very fine materials, i.e.,. 3 cement plus marble powder). The proportions of.
objective of this project is to study the mechanical properties of concrete mixtures in which fine aggregate (sand) and cement were partially replaced with Granite powder and marble powder. The replacement is done by 5%, 10%, 15%, 20%, 25% of cement by marble powder and 5%, 10%, 15%, 20%, 25% of fine aggregate.
marble powder as partial replacement of Portland cement. Hebhoub H., et al., (2011), carried out research on marble waste as a substituted material as natural aggregates in concrete production with different mixture proportions such as sand substitution mixture, gravel substitution mixture and a mixture of both aggregates.
Feb 3, 2016 . In this paper an attempt has been made to determine the properties of concrete by partially replacing sand by stone quart dust and cement by marble powder. It is proposed to study the possibility of replacing sand with locally available crusher waste without sacing the strength and workability of concrete.
Abstract As part of the increasing efforts to promote recycling or reutilization of residues generated from industrial activities, for environmental reasons, the effect of the partial replacement of sand was studied by (a) Marble reject samples, (b) Granite reject samples and (c) Mixtures of marbles and granite rejects with an.
grade and the partial replacement of concrete material were decided to reuse industrial waste such as waste marble dust powder as cement replacement in range of 5%,10%,15% by weight of cement, the quarry dust as fine aggregate replacement in range of 20%,25%,30% by weight of sand and the coconut shell as.
Jan 22, 2016 . Additionally, the use of marble pieces in place of coarse aggregate revealed that this contributed to the worNability and mechanical properties of the concrete. When natural standard sand was replaced with marble dust at a ratio of 15% and 75%, the compressive strength and splitting tensile strength of.
The percentage of Waste marble powder that replaced cement in this investigation are 0%,5%,10%, 15% and. 20% .The fresh proprieties are workability and hardened . production by discussing the properties of concrete contained marble dust as a cement replacement and as a sand replacement (cement addition).